Dec 172013
 
41. AIR MANIFOLD air_header

Purpose : Air Headers replaces many unit valve assemblies , which would normally be operating from one source.  The Air Headers  are suitable for use with a variety of outlet take-off valves. The inlet-connection can be flange- or screwable. A drain-valve is possible at the manifold exit. The manifolds can be supplied with a bracket / U clamp for wall mounting.

Installation cost & space considerable when air headers are use

Specification for air headers :

M.O.C SS316 / SS304 / CS
SIZE  11/2″ /  2″  -  SCH40 / SCH80
INLET ANSI B 16.5 , 150#   RF 1″ NB Flange  /1″ NPT (f) 3  PEICE UNION
DISTRIBUTION PORTS  Size   -¼” / ½” , Ports  -    6 / 8 / 10 / 12 / 16
OUTLET ½” NPT (F) , SS316 / SS304  BALL VALVE WITH ½” NPT(M) PLUG
  • For CS Air Headers distribution ports are provided with ¼” Brass Needle valves
  • For SS316 / 304 Air Headers distribution ports are provided with ¼” SS 316 / 304  Needle / Ball valves.
  • For mounting purpose ‘ U ‘ clamp will be provided.
  • All NPT Threads will be as per ANSI B 2.1. & Socket Weld  will be as per ANSI B 16.11 .

Note  :- Air headers can be fabricated as per your  requirement of M.O.C & size.