|
|
Purpose :
Air Headers replaces many unit valve assemblies , which would normally be operating from one source. The Air Headers are suitable for use with a variety of outlet take-off valves. The inlet-connection can be flange- or screwable. A drain-valve is possible at the manifold exit. The manifolds can be supplied with a bracket / U clamp for wall mounting.
Installation cost & space considerable when air headers are use |
|
|
| Specification for air headers : |
| M.O.C |
: |
SS316 / SS304 / CS |
| SIZE |
: |
11/2" / 2" - SCH40 / SCH80 |
| INLET |
: |
ANSI B 16.5 , 150# RF 1" NB Flange /1" NPT (f) 3 PEICE UNION |
| DISTRIBUTION PORTS |
: |
Size -¼" / ½" , Ports - 6 / 8 / 10 / 12 / 16 |
| OUTLET |
: |
½" NPT (F) , SS316 / SS304 BALL VALVE WITH ½" NPT(M) PLUG |
|
|
- For CS Air Headers distribution ports are provided with ¼" Brass Needle valves
- For SS316 / 304 Air Headers distribution ports are provided with ¼" SS 316 / 304 Needle / Ball valves.
- For mounting purpose ' U ' clamp will be provided.
- All NPT Threads will be as per ANSI B 2.1. & Socket Weld will be as per ANSI B 16.11 .
Note :- Air headers can be fabricated as per your requirement of M.O.C & size. |
|
