Quality

Quality policy :

Our motto is to enhance customer sanctification by supplying consistent quality product as per MSS SP 99, ASTM F 1387, BS 4368 Part IV applicable regulatory requirements in an efficient and cost effective manner and continuously improve the effectiveness of qms.

Emedius Aranjo
Director.

Being an ISO 9000:2008 certified company we accomplish our quality policy through a process of continuous improvements in all areas of operations. We have our own quality testing laboratory where we conduct all our tests that are as per MSS SP 99, ASTM F 1387, BS 4368 Part IV. Our experts continuously conduct laboratory tests in conformation to various international specifications. Our adherence to stringent quality control procedures and strict vigil on the entire production process ascertains that our range is in compliance with ASME Standards

In order to ensure that our range is incomparable on the quality front, we have the following in-house testing facility

In house testing & inspection facilities :

ASTM F1387 on Tube Fittings BS4368: Part 4 on Tube Fittings
TEST DESCRIPTION Tests and Examination
Examination of Specimen Hydraulic Proof Pressure test
Pneumatic Proof Test Minimum Static Gas Pressure (Vacuum) Test
Hydrostatic Proof Test Maximum Static Gas Pressure Test
Impulse Test Hydraulic Burst Pressure Test
Flexure Fatigue Test Dismantling and Reassembly Test
Tensile Test Hydraulic Impulse and Vibration Tests
Burst Test (Hydrostatic)
Repeated Assembly
Rotary Flexure Test
Elevated Temperature Soak
Vibration Test


MSS SP 99 for Valves
Testing Parameters
Temperature Testing
Test Pressure
Test Medium
Verification of Material Properties
Hydrostatic Burst Pressure test

Sample quality assurance plan : Final inspection quality plan

Items : compression tube fitting.

Sr. No. Characterstics / Process Specification Mode of Check Sample Size Frequency Record Reference Reaction Plan

1

Dimensional Checks As per drawing / Customer requirement VernierPlug GaugeThread
Gauge
As per samplingplan – A

Every Lot

Final Inspection Report QC/F/03/00 In case of rejection , prepareNon – Conformance
ReportQC/F/06/00

2

Hydrostatic Pressure Test

As per Testing Standard
/Customer requirement

As per W I As per sampling plan – A Every Lot Do Do

3

Pneumatic Pressure Test

As per
Testing standard / Customer requirement

As per W I

As per
sampling

plan – A

Every Lot

Do

Do

4

Identification

Controlled Sample

As per W I

100%

Every Lot

Nil

5

Packing

Nil

As per W I

100%

Every Lot

Packing List

qq

Note:- Apart from the above inspection methods , if any special requirement of testing from customer is required, then the suitable standards recommended by customer will be refereed & followed.

Final inspection quality plan

Items : valves.

SR. NO. CHARACTERSTICS / PROCESS SPECIFICATION MODE OF CHECK SAMPLE SIZE FREQUENCY RECORD REFERENCE REACTION PLAN
1 Dimensional Checks As per drawing / Customer Requirement Vernier Plug Gauge Thread Gauge As per sampling plan – B Every Lot Final Inspection Report QC/F/03/00 In case of rejection , prepare Non – Conformance Report QC/F/06/00
2 Hydrostatic Pressure Test
a) Body Test
b) Seat Test
As per Testing Standard /Customer requirement As per W I As per sampling plan – B Every Lot Do Do
3 Pneumatic Pressure Test
a) Body Test
b) Seat Test
As per Testing Standard/Customer requirement As per W I As per samplingplan – B Every Lot Do Do
4 Identification Controlled Sample As per W I 100% Every Lot Nil
5 Packing Nil As per W I 100% Every Lot Packing List
Note:- Apart from the above inspection methods , if any special requirement of testing from customer is required then the suitable standards recommended by customer will be refereed followed.